Skip to content

DC Drive Electric Rollsizer


DC Electric Drive Rollsizer suitable for most pistol calibres. Suitable for medium volume processing, processing rate is approximately 1200 cases per hour and is suitable for operation with most standard Dillon ™ casefeeders.

*Please check your motor voltage is correct before proceeding to order. The power brick supplied with your order will accept voltages from 90VAC to 305VAC but the adaptor plug we supply may be different if you do not get this right.

Out of stock


As of 1st August the DC rollsizers are out oif stock in Australia, replacement stock is expected around late September. Small amounts of stock are available in the USA but expect to sell out shortly.

We will open up for advance ordering when we have an date when these will be available.

The DC Electric Drive Rollsizer is suitable for the low to medium volume reloader. The DC electric rollsizer uses a similar rolling methodology as the large scale rollsizer but at a lower cost and processing rate

Machined base plate, adaptor shaft, Drop tube mounting bracket, DC Motor and power supply and 2 x angle iron brackets suitable for mounting / securing to a work bench. Calibre conversion discs and drop tubes are separate and must be ordered seperately.

Machine only dimensions: 270mm x 250mm x 230mm



Weight 9 kg
Dimensions 270 × 250 × 230 mm

1 review for DC Drive Electric Rollsizer

  1. Brandon

    I purchased this unit about a year ago. After running ~15,000 rounds through the machine it still works flawlessly. This is perfect for my reloading needs. I currently use it for 9mm, 40, and 45ACP. After rollsizing my percentage of cases that don’t sit flush in the case gauge dropped from 12/100 to about 2/500. Thanks for the great product.

Only logged in customers who have purchased this product may leave a review.