Commercial Rollsizer Base Unit
Rollsizer base unit only, no calibre conversion parts included. The rollsizer removes the bulge in the base of the fired case to bring the case back into SAAMI specification to allow reliable case gauging and ammunition reliability.
*Please check your motor voltage is correct before proceeding to order.
DC Drive Electric Rollsizer
DC Electric Drive Rollsizer suitable for most pistol calibres. Suitable for medium volume processing, processing rate is approximately 1200 cases per hour and is suitable for operation with most standard Dillon ™ casefeeders.
*Please check your motor voltage is correct before proceeding to order. The power brick supplied with your order will accept voltages from 90VAC to 305VAC but the adaptor plug we supply may be different if you do not get this right.
Manual Rollsizer suitable for most pistol calibres as well as 223 and 308. The manual rollsizer is a compact rollsizer suitable for processing cases in small batches around 400-500 in one sitting (typically 30-40 minutes). The manual rollsizer should be mounted to your reloading bench for the best results using G clamps or Self Tapping screws through the supplied mounting base.
A high powered drill will easily produce 2,000 cases per hour. Most drills are not designed for continuous operation so if you want to run for 1 hour, expect to replace it every few months, If you buy a new drill get one with a long warranty and keep the receipt………