Skip to content
Step 1 of 5

Select your Rollsizer

Commercial

Suitable for high volume shooters and commercial processing operations. Recommended for people processing larger volumes at a time (3,000 cases per time).

Fastest rate (6,000+ per hour)
Processing rates up to 6,400 cases per hour (if your case feeder can keep up)
High volume use or time poor users!!
Genuine commercial grade machine designed for continous operation
Commercial or upgraded casefeeders required to get full throughput
Commercial grade feeders recommended. Upgraded Dillon Casefeeders for domestic operation only
Commercial or high volume use
Commercial or high volume processors (or time poor competitors)
Commercial case quality
The commercial will provide the highest quality case shape suitable for commercial operations (usually limited by case quality)
Highest Life expectancy
Comercial machines are routinely exceeding 20 million cases before replacement parts are required.
From AUD$2,024.00 – AUD$2,134.00
Select

Delivery:
In Stock

Compact DC

Suitable for medium volume shooters (typically 1,000 to 2,000 cases per use) this will provide the best combination of time vs cost.

Medium rate
Processing rate is 1,500 cases per hour
Personal Use
Recommended for medium to higher volume personal use only.
Dillon Casefeeder will work, Manual feeding not recommended.
Standard Dillon casefeeders should work fine with this rollsizer
Medium volume shooters
Most competitive shooters (500+ rounds per month) Please consider the time to process as this often effects selection.
Domestic case quality
Case formation will provide reliable feeding, but not recommended for commercial or resale operations. Minor marks expected on some cases.
Life Expectancy
Wear life on rolling parts will be dependent upon case cleanliness. Gearbox and Motor life will be approx 1,000 hrs operation (around 1.5m cases)
From AUD$1,181.40
Select

Delivery:
In Stock

Manual

Suitable for low volume shooters only. Manual cranking or drill operation is required, Recommended no more than 100 cases at a time with manual cranking and 500 cases at a time with drill operation is recommended.

Slowest rate
Manual crank is approx 500 per 1/2hr or up to 2500 per hour with a drill. Not recommended for processing more than 500 cases per time.
Ocassional use
Recommended for the occassional shooter who wants reliable ammunition across multiple firearms
Manual Feeding or Casefeeder will work
Manual feeding or Dillon case feeders will work fine.
Occasional shooter
Occassional shooter who wants to process reliable ammunition
Domestic case quality
Case formation will provide reliable feeding but not recommended for commercial or resale operations. Minor marks expected on some cases.
Durability
Wear life on rolling parts will be dependent upon case cleanliness. Gearbox life Unknown, we haven't had any wear out yet. Usually you will wear out drills or your hand.
From AUD$687.50
Select

Delivery:
Out of Stock

110VAC
USA Cuba Canada Japan
220VAC
Cuba Europe
240VAC
Australia New Zealand
Back
Next
↑